Heritage Specifications

Wall & Base Cabinets

Cabinets shall be manufactured of all wood with no particle board (unless specified) using the materials herein specified and shall be provided with wood blocks and braces glued and stapled in place as necessary to assure sturdy rigid construction. All materials and manufacturing standards meet or exceed KCMA standards.

Face Frame

Cabinets shall be constructed with front framed members of sound solid hardwood lumber, kiln dried suitable for natural finish and of ¾“ nominal thickness. All frame members shall be mortised and tenoned or back screwed with joints glued and stapled.

End panels

End panels for exposed and unexposed cabinet ends shall be ½“ oak plywood. All end panels shall be dadoed to receive back, shelves, bottoms and wall tops. All end panels shall be let into face frame rails.

Shelves

Shelves shall be ¾“ thick 2-2 grade softwood plywood with exterior glue and solid wood banded exposed edges. Fixed shelves in bases, adjustable shelves in uppers (Vinyl finish on adjustable shelves with solid wood banded exposed edges).

Upper Tops/Bottoms

Tops and bottoms shall be ½“ thick 2-2 grade softwood plywood with exterior glue.

Backs

Cabinet backs of 1/8“ softwood plywood shall be attached to minimum size ¾“ x 3 ½“ solid wood hanging rails which shall be mortised to receive back and bottom.

Doors

Doors of ¾“ oak (raised square panel, cathedral) shall have dadoed edge shaped to form finger pull. Hinging shall be concealed. All in stock cabinets come standard with Cathedral Arch. Square Raised Panel available upon request.

Base bottoms

Base cabinet bottoms of ¼“ softwood plywood with exterior glue shall be let into ends and back rails and blocking support.

Heritage Plus specifications equipped with 1/2“ softwood plywood with exterior glue.

Drawers

Drawers shall be constructed with sides and backs of nominal 5/8“ solid pine lumber and dovetailed into fronts. Back of drawer shall be dadoed into sides and drawer backs. Sides and fronts shall be dadoed to receive drawer bottoms. All drawer bottoms to be 1/8“ softwood plywood. Drawer runners shall be KV2806 100lb capacity.

Finish

Exposed surfaces and interior of cabinets shall be factory finished consisting of stain, sealer and varnish coats lightly hand sanded between applications. Low maintenance and easy care.

Cabinet contains no particleboard (unless specified)

Any or all listed specifications may be altered to fit the specifications of the customer. Nine inch wall cabinets are not available with Cathedral doors.

Click here for samples of this line.